| MODEL |
JC1642 (JC1642P) |
| Frequency range |
0.1Hz ~3MHz(8SEC )
 1 0.1Hz~1Hz
10 1Hz~10Hz
100 10Hz~100Hz
1k 100Hz~1kHz
10k 1kHz~10kHz
100k 10kHz~100kHz
1M 100kHz~1MHz
3M 300kHz~3MHz |
| Output waveform |
Function output |
Sine,square and triangle symmetrical or unsymmetrical |
TTL/CMOS
output |
Pulse wave (CMOS output f 100kHz) |
| Sine wave distortion |
1% |
| Triangle wave linearity |
＞99%(output rang :10%~90%) |
| Pulse wave raise time |
30ns |
| Pulse wave raise over impulse |
5% |
| Output impedance |
Function signal output |
50 |
| TTL/CMOS signal |
600 |
| External input frequency characteristic |
impedance |
About 500K |
| Signal range |
0V~+3V |
| Signal cycle |
10ms~5s |
| Signal style |
Single frequency, sweep frequency,frequency modulation(controlled) |
| Symmetry degree range |
20%~80%,"off"will output symmetry waveform,error2% |
| DC bias |
Continually adjustable-10V-10V  10% (1Moverload),-5V~+5V 10%(50overload),"off"will output DC Level <0.1V |
TTL output(load impedance 600) |
"0"level |
0.8V |
| "1"level |
3V |
| CMOS output(load impedance2 K) |
"0"level:0.8V "1"level:5V-15V continually adjustable |
single fixed
Frequency output |
frequency |
waveform |
Output range |
| 100Hz2Hz |
Sine wave |
≈2Vp-p |
Voltage output
(1M load
Resistance) |
Without attenuation:(1.0Vpp~20Vpp)10%(ajustable)
attenuation 20dB: (100mVpp~2Vpp) 10% (adjustable)
attenuation 40dB: (10mVpp~200mVpp) 10% (adjustable)
attenuation 60dB: (1.0mVpp~20mVpp) 10% (adjustable) |
| Range display |
unit |
Vpp or mVpp |
| error |
Vo20%1 character(Vo : the peak value of output signal)
Load resistance is 50, Vo reading *1/2 |
| Differentiation rate |
0.1Vpp(no attenuation), 10mVpp(attenuation 20dB),1mVpp(attenuation 40dB),0.1mVpp(attenuation 60dB) |
Power output
frequency |
0.1Hz~100KHz |
The max power.
output voltage |
50VP-P |
The max. power
output current |
1AP-P |
Power output
current
overload |
Overload indication |
| Time base nominal frequency |
24MHz |
Frequency
count |
Frequency range |
0.1Hz~40MHz |
| Voltage range |
1Hz-40MHz 30mV-2V 0.1Hz-1Hz 150mV-2V |
| Impedance range |
500K/30pF |
| Filter end frequency |
About 100KHz (with inner attenuation to satisfy the min. voltage as requirement.) |
| Measure error |
Time base error+ Trig error(The SN rate of tested signal is better than 40dB with singal period)(trig error0.3%) |
| Power voltage |
AC 220V10% |
| Power frequency |
50Hz2Hz |
| Dimension |
LBH:28021085 mm |
| weighty |
2.5kg |
Top
Print this page
Recommend this page